The grinder will throw a lot of sparks, so make sure your eyes are protected. Cutting along the marker line and keeping the grinder secure.Cutting the expanded metal along the joints where it comes together is a easy method.
You need to measure the size of expanded metal, then make a mark line on the position where you want to cut. Turn on the grinder and cut the expanded metal. The next job you should do is clamp the metal ruler to the expanded metal with the clamps, then put it along the measurements that you made. Continue this process until the metal is separate, then the task is complete.Use a permanent marker to mark the metal along the ruler to make a cut line. You should use the tape measure to make sure the measurements are accurate.
Put on a pair of safety glasses, hold the grinder securely and steadily in your hands. Remove the metal ruler and the clamps fromyour expanded metal. Each gap in the expanded metal will cause the grinder to move forward, so keep a steady hand as you work down the expanded metal. Put the expanded metal onto a raised surface so that your cuts won't go into the concrete or other work surface.
Expanded metal comes in many different shapes and forms, but it is very hard to cut There are some easy ways to cutexpanded metal rightly, read the following text and keep some important steps in your mind, you will complete this task easily.

Hebei Qianye Metal Products Co.,Ltd.

Address :2nd,Xingsheng Road,Machangtun Village,Wangtongyue Town,Raoyang County,China

Qianye Metal (Shijiazhuang) Office
Add: Room 2103,Tianzi Guanli Apartment 1#, No.39 Guangan Street, Changan District, Shijiazhuang City, Hebei Provice, China.
Tel: +86-311-85525702
Fax: +86-311-85525815

Qianye Metal (HK) Ltd
Add: Room 2105,JTJ 985 Trend Centre, 29-31Cheung Lee Street, Chai Wan, Hong kong.

E-mail:sales@wiremeshglobal.org

Web:www.wiremeshglobal.org