Repairing Sections of a Wood Fence
When you begin to nail the boards in place, start at one end and leave a board-width space between each. Place the rails between slightly above grade level to 12 inches up.
If you need an entire rail replaced on your wooden fence, cut 2-by-4-foot rails that will fit flat along the tops of the posts. Do the same with the rest of the boards in the spaces that you left.
Nail bottom rails at an angle through the fence post and into the end of each rail. Use a level to help keep the rails even.
Measure and cut fence boards a uniform length, equal to the measurement from the bottom of the ground rail to the top of the high rail.
Extend the rails from post to post or extend a single rail across two sections. Put rails in place with the ends butted tightly against one another.
After checking their positions, nail them in place with 10d galvanized nails at either end. Repeat steps for a bottom rail. Secure boards with 8d nails on the top and bottom, tops nailed first.
Hebei Qianye Metal Products Co.,Ltd.
Address :2nd,Xingsheng Road,Machangtun Village,Wangtongyue Town,Raoyang County,China
Qianye Metal (Shijiazhuang) Office
Add: Room 2103,Tianzi Guanli Apartment 1#, No.39 Guangan Street, Changan District, Shijiazhuang City, Hebei Provice, China.
Tel: +86-311-85525702
Fax: +86-311-85525815
Qianye Metal (HK) Ltd
Add: Room 2105,JTJ 985 Trend Centre, 29-31Cheung Lee Street, Chai Wan, Hong kong.
E-mail:sales@wiremeshglobal.org