Place at one end the cross-brace pole at the base of the first fence post and place the other end on top of the second fence post. Lay the page wire on the ground. Note the space between the end rungs and make the widest end rungs the top of the fence. Bring the open wire ends back over onto itself to strengthen the page wire fencing Cut the cross-brace pole straight down at the point where it rests upon the second fence post using the chain saw. Tack up the page wire fencing by driving a double-barbed staple over each rung into a fence post using the large hammer. Once it is cut it will drop down into place. Unroll the page wire the entire length of the fence. Cut straight down in the middle of the rungs when you get to the end of the fence. Screw the upper cross-brace pole to the adjacent second fence post with two screws spaced equidistant using the electric drill. Repeat this with the opposite end of the cross-brace pole. Pull the fencing slowly until it is taut. It should now stand straight up. This will take the slack out of the page wire fencing helping to keep the tension on the fence. Place another pole spanning the top of the first and second fence posts. Cut to a snug fit. Notch each end so that it will resist moving out of place. Screw into the first and second posts just as you did the cross-brace pole. Repeat until you have the page wire fencing stapled into each fence post and cross poles. Weave a pipe through the end of the fence. Chain this pipe to a small tractor.

Hebei Qianye Metal Products Co.,Ltd.

Address :2nd,Xingsheng Road,Machangtun Village,Wangtongyue Town,Raoyang County,China

Qianye Metal (Shijiazhuang) Office
Add: Room 2103,Tianzi Guanli Apartment 1#, No.39 Guangan Street, Changan District, Shijiazhuang City, Hebei Provice, China.
Tel: +86-311-85525702
Fax: +86-311-85525815

Qianye Metal (HK) Ltd
Add: Room 2105,JTJ 985 Trend Centre, 29-31Cheung Lee Street, Chai Wan, Hong kong.

E-mail:sales@wiremeshglobal.org

Web:www.wiremeshglobal.org