Products

DUST SUPPRESSION AND WINDPROOF SCREEN

Dust suppression and windproof screen is made of perforated metal.It is used in depts,railway sation,mining,ect.
Preformance:
Turbulent will be formed after the wind go through the dust repression and wing proofing wall then the attenuating range of the wind speed and the air pressure will be proportional to the square of the wind speed that is to say if the wind speed is higher,the rate of dust repression will be higher and the effects of the control of the dust repression will be better.
1. anti-ultraviolet (anti aging)
2. impact 3.flame ret ardency
4. anticorrosion
5.anti-static
Design ,Construction and the Application Effect:
In the usage of the dust suppression and wind proofing wall that installed in the open preparation plant,the installation mode,the height of the net and the distance between the board and the stacking should be solved at first.
In the recent years,the dust preventing effects is obvious.The comprehensive dust preventing effects of the single-layer dust suppression and wind proofing wall could reach 65%-75% now.The double layer could reach 75%-85%.So the setting of the board protects the environment efficiency,and at the same time,a scenery appears on.

   
   
   
   

Details:

  • Type:
    >three peaks wind dust net
    >single peak wind dust net
    >twins peak wind dust net
    Material:
    steel plate,galvanized plate.color coated plate,stainless steel sheet.
    Surface:
    electrostatic poeder coating
    Color: blue,yellow,green,red,etc

    single peak wind dust net:
    Forming 250mm-500mm in width, peak of high is 50mm-100mm, Plate thickness 0.5mm-1.5mm. Length: 0-4m. We can produce according to customer's
    Twins peaks wind dust net:
    Forming 400mm-600mm in width, peak of high is 50mm-100mm, Plate thickness 0.5mm-1.0mm. Length: 0-10m. We can produce according to customer's requirements.
    Three peaks wind dust net:
    Forming 810mm in width, peak of high is 80mm, Plate thickness 0.5mm-1.0mm. Length: 0-10m. We can produce according to customer's requirements.